pericom semiconductors PI2EQX511E is a low power, high performance 5.0 gbps signal redriver? designed specifically for the usb 3.0 protocol. the device provides programmable equalization and de-emphasis to optimize performance over a variety of physical mediums by reducing inter-symbol interference. PI2EQX511E supports one 100? differential cml data i/os between the protocol asic to a switch fabric, over cable, or to extend the signals across other distant data pathways on the users platform. the integrated equalization circuitry provides flexibility with signal integrity of the signal before the redriver. a low-level input signal detection and output squelch function is provided. the channels input signal level determines whether the output is active. the PI2EQX511E also includes a receiver detect function. the receiver detection loop will be active again if the corresponding channels signal detector is idle for longer than 7.3ms. the channel will then move to unplug mode if load not detected, or it will return to low power mode (slumber mode) due to inactivity. block diagram application diagram www.pericom.com | 1-408-232-9100 PI2EQX511E 1.8v 5.0gbps, 1-channel, usb3.0 redriver? ? ? usb 3.0 compatible ? ? full compliancy to usb 3.0 super speed standard ? ? one 5.0gbps differential signal pairs ? ? adjustable receiver equalization ? ? 100? differential cml i/os ? ? pin configured output emphasis control ? ? input signal level detect and squelch function ? ? automatic receiver detect ? ? low power : ~110mw (typ) ? ? auto slumber mode for adaptive power management ? ? single supply voltage: 1.8v tablet pc multi-function printer pericom usb3.0 redriver pericom usb3.0 redriver pericom usb3.0 redriver external storage device usb 3.0 cable usb 3.0 cable digital camera features rxp cml cm l limiting a mp e qualizer s ignal detection p ower management rxn txp txn eq product databrief new product brief
|
